Phuket Directory

East Marine Co., Ltd.

3.5 out of 5 based on 2 reviews.
Koh Kaew, East Phuket

East Marine is a supplier of paints, varnishes, Rupes tools, 3M Marine, Brushes, Rollers, Fiberglass, Resins, Deck hardware, Hatches, Groco Marine fittings, Jabsco, Marine Stoves, BBQ’s, Anodes, 316 Fasteners, Hose clamps, Whale, Rule, Eletrical products, Hinges, Yacht hardware, Rigging, Hi-Tech Ropes and much more.

We can be easily found in Phuket Boat Lagoon in Koh Kaew which is around 10 minutes drive from Phuket Town.


650 G/Flex Epoxy Resin

A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. This gives G/flex the ability to make structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modified with West System fillers and additives, and used to wet-out fiberglass tapes and fabrics. Mixed at a 1:1 ratio, G/flex gives you 45 minutes of working time at room temperature. It reaches an initial cure in 7 to 10 hrs and full cure in 24 hrs. Sold in set part A & part B



105 Epoxy Resin is the base material of the WEST SYSTEM compounds are built. The resin is a clear, pale yellow, low-viscosity liquid epoxy resin. Formulated for use with WEST SYSTEM hardeners, it can be in a wide temperature range to form a high-strength solid with excellent moisture resistance. 105 Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approxi mately 1000 centipoise (cP) at 72F (22C) 105 Resin is designed apecifically to wet out and bond with wood fiber, fiberglass, reinforcing fabrics and a variety of metals when mixed at the proper ratio with a WEST SYSTEM H206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working and cure time is needed or to provide adequate working time at higher temperatures. When combined with 105 Resin in a five-part resin to one-part hardener ratio, the cured resin/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties. Not intended for clear coating.


Awlgrip Topcoat

A two component, polyester based, light-fast, linear aliphatic polyurethane coating with long lasting gloss and color retention, and outstanding chemical resistance. Do no use below the waterline. A low maintenance coating. Do not wax, buff, compound, or polish. Product is sold by the gallon. Mixing and Reduction : SPRAY : Mix by volume one part AWLGRIP Topcoat Base Component with one part AWL-CAT #2/G3010 Spray Converter to a smooth, homogenous mixture. Reduce up to 25% with T0001, T0002, T0003 depending on conditions. Overall mix is 1:1:1/2 by volume. BRUSH/ROLLER : Mix by volume two parts AWLGRIP Topcoat Base Component with one part AWL-CAT #3/H3002 Brushing Converter until one smooth, homogenous mixture is obtained. Reduce 25% to 33% with T0031. Overall mix is 2:1:3/4-1 by volume. VOC : 470g/lt or 3.9 lbs/gallon Packaging : Available in Gallon and Litre containers.


MUIR Atlantic Vertical Windlasses

The award winning Muir Atlantic series revolutionises rope chain windlass technology. They are the preferred choice for high performance and smooth operation of rope-chain or chain only anchor rodes. The Atlantic series of vertical windlasses provides the strength of conventional vertical windlasses but with advanced and innovative concepts. Recognised for their sleek curved lines, Atlantics are available in low profile (VR) or capstan (VRC) configurations, with models to suit all recreational and commercial vessels up to 35m (115ft). Atlantic windlasses provide the highest level of security and safety, whilst enhancing the foredeck of the most luxurious vessel.


Southeast Asia Pilot

Incorporating the Andaman Sea, Gulf of Thailand, Malacca, Straits, Darwin to Singapore, the Philippines and Hong Kong. detailed charts including GPS positions updated anchorage information regional cruising guide regattas, boatshows & marinas


Dinghy Wheel Set

Provide single handed manoeuvrability, launching and retrieval of dinghies, including motor and gear, on a variety of surfaces such as packed sand or gravel, tidal areas, grass, concrete boat ramps and bitumen car parks. A unique twist grip positively, but quickly, locks the wheels in the down position for wheeling, and in the up position for when the boat is in the water. When in the retracted position there is no protrusion above or below a standard dinghy transom. Manufactured from marine grade aluminium, stainless steel and composite materials.


Waterproof case for iPhone 4/4S

• Easy Combine with Verti become waterproof • Waterproof up to 3 meter / 9 feet, IP68 Certified • Take photos and videos underwater • Protects from weather, dust, dirt, impact and scratches • For outdoor use, sport and leisure


Hypalon Rib 310

With an advanced fiberglass hull shape, these boats are quick to plane and they handle with ease. The V-section slices through chop or swell for a dry, comfortable ride. The 310 has a sturdy single floor, while the 350 model has an ultra-strong double floor. Roomy interiors afford plenty of cargo space and lightweight construction tops the performance of larger, heavier RIBs. A good choice for tropical climates, long service life is assured by UV-resistant Hypalon fabric and solid fiberglass transoms that won't rot like wood. Built-in davit padeyes come factory installed a feature that normally costs extra. Boats include seat, pressure gauge, oars and repair kit. Application: Rigid Hull Sportboat/Performance Tender Fabric: 1100 decitex French Orca 215 Hypalon Tube Diameter: 16" Number of Chambers: 3 Bottom Shape: V-shape Floor: Fiberglass Transom Construction: Fiberglass Seam Construction: Glued Warranty: Five years


RUPES - EK200A Plane Tary Sander w/Dust Extration

The forced rotation of gears maximizes the removal power while minimizing machining time and fatigue. Fitted with a 200 mm backing plate for the machining of large flat surfaces. Excellent to remove the dust produced during machining. Electric parts insulated with special resins that protect and extend the life of the tool Configured to be connected to vacuum systems with revolving fixture. Vacuum regulator to eliminate the "suction" effect of the backing plate on the surface. Ergonomic handle for left and right-hand side use. Part # 33500066


MARTYR - Streamlined Collar Anodes

Designed with 100% circular radius and no ribs for full shaft contact. Halves interlock for ease of installation. for available please visit...

Write a Review
  1. Established in 2006, East Marine is a chandlery located in the Phuket Boat Lagoon on the east coast just north of Phuket Town. The company also operates an online chandlery through its website: and can ship to any part of the world. East Marine also operates a mobile chandlery that calls at various locations around Phuket a number of days per week including Ao Po and Yacht Haven marinas.

  2. Professional shop with staff that gave me good advice, Was able to buy some brass values which resolved my plumbing problems on my boat. Handy as in Boat Lagoon.

  3. If you want something for your boat to do your own repairs these are the guys to go to first. If they don’t have the quality product you need it probably is not on the island, cheaper quality elsewhere maybe but not the high end quality stuff

    Not the cheapest place but then quality counts

Go Top

Contact Form

  • This field is for validation purposes and should be left unchanged.